Four algal adsorbents were prepared from two types of green sea algae (Ulva lactuca and Ulva pertusa), either by treatment with concentrated sulfuric acid or without treatment. A comparative study of Au(III) adsorption in an HCl medium was performed. While both untreated adsorbents showed good performance at low HCl concentrations, the treated adsorbents achieved quantitative adsorption and high selectivity for Au(III) across a broad range of HCl concentrations. The adsorption of Au(III) onto the algal biomass adsorbents followed the typical Langmuir monolayer adsorption model. At an HCl concentration of 0.010 M, the maximum adsorption capacities were 1.14, 0.86, 6.57, and 6.28 mol kg–1 for DUL, DUP, TUL, and TUP, respectively. A kinetic study conducted at different temperatures was consistent with the pseudo-first-order kinetic model and enabled estimation of the activation energy of the adsorption reaction. Structural changes before and after treatment were analyzed using FT-IR spectroscopy. Confirmation of Au(III) adsorption and its subsequent reduction to the elemental state was achieved through XRD and SEM/EDX analyses as well as digital imaging of the Au-loaded adsorbents. Finally, the adsorbed and reduced Au was successfully desorbed using an acidic thiourea solution.
Adhikari et al. (Thu,) studied this question.