Factor Analysis and Mechanism Revelation of Reservoir Conditions and Driving Fluids Affecting Geothermal Energy Extraction

Introduction: Efficient geothermal energy extraction has the potential to significantly alleviate the shortage of fossil energy, but low extraction efficiency and an insufficiently understood extraction mechanism remain key bottlenecks hindering its large-scale deployment. Method: This study develops a fluid–solid coupled numerical model based on the intrinsic physical properties of geological reservoirs to systematically analyze the energy extraction characteristics of geothermal systems. Simultaneously, the effects of key geological factors on fluid flow behavior within geothermal reservoirs are investigated. Furthermore, molecular dynamics simulations are employed to elucidate the microscopic mechanisms by which driving fluids facilitate geothermal energy extraction. Results: The results demonstrate that the thermo-hydraulic–mechanical (THM) numerical model was validated through a comparison with benchmark data reported in previous studies, exhibiting a high degree of agreement with geothermal extraction performance. The model further confirms that heat transport in the geothermal reservoir is characterized by a pronounced “tongue-in” isotherm pattern during the extraction process. Discussion: Lower initial temperatures of the driving fluid lead to more rapid geothermal energy extraction compared with higher initial temperatures, and the “tongue-in” phenomenon becomes increasingly pronounced as the initial injection temperature decreases. Moreover, increased injection pressure significantly enhances geothermal energy extraction efficiency; however, reduced pressure differentials markedly suppress the development of the “tongue-in” pattern and decrease reservoir permeability. In addition, water used as a heat-driving fluid achieves higher thermal extraction efficiency than water, while simultaneously exerting a stronger moderating effect on the permeability evolution of geothermal reservoirs. Conclusions: The simulation results obtained from the thermo-hydraulic-mechanical (THM) numerical model provide fundamental data to support the efficient development of geothermal reservoirs, while the associated analyses offer valuable insights into the selection of appropriate driving fluids for reservoirs with distinct geological characteristics.