Wind is a significant contributor to global energy requirement, with technological advancements in this industry enabling its rapid growth over the last few decades. The rise in demand for clean energy provides the driving factor to make wind more efficient and widespread. One such solution involves mitigating the aerodynamic noise of wind turbine rotors to harness untapped energy and improve turbine efficiency. Quieter wind turbines gain community acceptance, promoting their widespread application. This article explores passive compliant coatings applied to a flat plate under fully turbulent conditions through Computational Fluid Dynamics (CFD) and wind tunnel testing. It extends prior flat plate investigations by evaluating the noise mitigation potential of passive compliant coatings in the context of wind turbine trailing edge (TE) noise. Two coatings with distinct material properties were investigated through Computational Aeroacoustics Analysis (CAA) and Fluid–Structure Interaction (FSI). While coating-1 (Dow Corning Silastic S-2) increased the overall sound pressure level (OASPL) by 2.89 dB, coating-2 (Dow Corning Sylgard 184) reduced TE noise by 2–4 dB/Hz between 600 and 1575 Hz and lowered the OASPL by 1.85 dB. Within the two configurations investigated, the differences in noise mitigation characteristics may be attributed to variations in coating stiffness and geometric compliance. Based on these simulations, wind tunnel tests were conducted to record noise measurements using coating-2 which revealed a 3.23 dB OASPL reduction, suggesting its suitability for wind turbine noise mitigation applications.
Giridhar et al. (Wed,) studied this question.