Building upon our previous aerodynamic characterizations of skewed jets, this study extends the investigation to systematically evaluate their thermal performance. Turbulent air jets are produced by unilaterally supplying coolant and forcing it through a series of concave perforated blockages having varying relative inner diameters (Din/Dj = 3.0, 4.0 and 5.0) or relative thicknesses (t/Dj = 0.5, 2.0, 4.0, 6.0 and 8.0), with the jet diameter and Reynolds number fixed at Dj = 21 mm and Rej = 20,000, respectively. The results demonstrate that the skewed jets exhibit pronounced asymmetric velocity profiles in both the x–z and y–z planes. Unlike the Gaussian distributions characteristic of conventional axisymmetric jets, these profiles manifest as distinctly skewed or saddle-shaped topologies. This topological distortion is exacerbated by reducing either Din/Dj or t/Dj, albeit through fundamentally different mechanisms: the former only leads to jet deflection from the geometric axis, with the deflection angle increasing non-linearly from α = 4°, 5° to 12°; whilst the latter induces asymmetric internal flow development and exit momentum redistribution. The thermal performance of these jets on an iso-flux target flat plate, characterized by Nusselt number distributions at different jet-to-target spacings (H/Dj = 0 to 8.0), is shown to significantly differ from conventional axisymmetric jets.
Zhang et al. (Mon,) studied this question.