Synthetic polymers are widely used in stone conservation, yet their long-term biological stability remains insufficiently evaluated. This study investigates the microbial susceptibility of three commonly used acrylic consolidants, Paraloid B-72, B-66, and B-44, applied to deteriorated limestone. Bacteria, fungi, and actinomycetes were isolated from a deteriorated limestone false door and screened for acid production. From each microbial group, only the strong acid-producing isolates were selected for further investigation, including evaluation of their ability to utilize the three Paraloid resins as sole carbon sources and their deterioration potential on limestone cubes before and after consolidation. Deterioration was assessed by weight loss, compressive strength testing, stereomicroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). All selected strong acid-producing isolates demonstrated the ability to grow on the tested polymers, confirming their biodegradation potential. Mixed microbial cultures caused greater weight loss and compressive strength reduction than single isolates, attributed to synergistic metabolic interactions. Among the consolidants, Paraloid B-72 showed the highest susceptibility to microbial attack, while Paraloid B-66 exhibited comparatively greater resistance, attributed to the steric hindrance of its isobutyl side groups and higher surface hydrophobicity. FTIR and XRD analyses confirmed ester bond hydrolysis, progressive gypsum formation, and structural alteration of the limestone substrate. These findings demonstrate that acrylic consolidants commonly used in stone conservation are not biologically inert and may actively contribute to biodeterioration under microbial colonization, highlighting the need for developing bio-resistant conservation materials.
Ibrahim et al. (Sat,) studied this question.