A major challenge in wastewater treatment lies in developing cost-effective and sustainable adsorbent materials for efficient dye removal. In this study, a novel biochar functionalized with MgO nanoparticles derived from palm leaf waste (MgO/PLB nanoparticles) was synthesized and evaluated for the removal of Congo red (CR) from aqueous solutions. FTIR, SEM, BET, and TGA investigations were used to thoroughly analyze the produced nanocomposite’s physicochemical properties. FTIR analysis verified the successful incorporation of MgO nanoparticles, as evidenced by the presence of characteristic Mg–O vibrations and noticeable changes in surface functional groups. SEM analysis revealed a transformation from a compact structure to a rough, particle-decorated morphology, indicating increased surface heterogeneity. BET analysis indicated the development of mesoporous structures, accompanied by a substantial increase in specific surface area from 2 to 178 m2/g. TGA results further confirmed enhanced thermal stability, indicating the formation of a structurally robust adsorbent. Batch adsorption tests showed that CR removal depends on pH, dosage, concentration, and contact time, with maximum efficiency (~99%) achieved at pH 4 using 0.03 g of adsorbent. The adsorption followed pseudo second order kinetics and was best described by the Langmuir isotherm, with a maximum capacity of 23.4 mg/g. The regenerated nanomaterial retained more than 89% of its adsorption capacity after four successive cycles, demonstrating good reusability and stability. The developed MgO/PLB nanoparticles exhibit efficient adsorption performance, combined with low-cost synthesis and the utilization of abundant agricultural waste, making it an affordable and long-lasting adsorbent for applications involving wastewater treatment.
Alfajri et al. (Sun,) studied this question.