Severe foaming and a significant decrease in desulfurization performance were noted in a novel UDS solvent applied in a natural gas field in western Sichuan, China. The effects of hydrocarbon and ionic impurities on foaming behavior and the purification performance of candidate adsorbents were investigated. An extraction-gas chromatography method was established and validated for determining total hydrocarbons in amine solutions, enabling quantitative evaluation of hydrocarbon contamination. Controlled contamination experiments revealed that hydrocarbons had the strongest effect on foaming, while sulfate and chloride strongly promoted foam formation; organic acid anions showed only minor effects. Fixed-bed screening identified A-98FM anion-exchange resin as the most effective for anionic impurity removal and AC-02 activated carbon as the best candidate for hydrocarbon purification, with a cumulative adsorption capacity q0–12 of 14.86 mg/g over 12 h. Pore-structure and thermal-release analyses suggested that conventional pore descriptors alone could not fully explain the dynamic purification performance, while hydrocarbon-related loadings in spent AC-02 occupied accessible pore space and contributed to performance decay. Treatment of a field-aged UDS lean solvent further showed that reductions in target impurities were accompanied by lower foam height and shorter defoaming time. This work provides experimental support for impurity monitoring, foaming-risk identification, and adsorptive purification of UDS desulfurization solvent under flowback-contamination conditions.
Wen et al. (Sat,) studied this question.