Flotation is a fundamental unit operation in mineral processing; however, achieving high selectivity while reducing the environmental impact of reagents remains a major challenge in phosphate ore beneficiation. Conventional depressants often exhibit limited selectivity and may pose environmental concerns, highlighting the need for sustainable alternatives. This study reports, for the first time, the application of starch nanostructures derived from potato pulp processing residues as a depressant in phosphate flotation, representing an innovative and eco-friendly approach. An exploratory and experimental methodology was adopted, including nanostarch synthesis via acid hydrolysis followed by centrifugation and sonication, as well as comprehensive physicochemical characterization. The primary objective was to evaluate the selective depressant performance of the nanomaterial in apatite–calcite flotation systems. The synthesized nanostructures exhibited particle diameters ranging from 179 to 443.6 nm. Microflotation tests conducted in a Hallimond tube using pure mineral samples under alkaline conditions (pH ≈ 9), at a depressant dosage of 500 mg/L and in combination with a plant-based fatty acid collector, revealed a pronounced selectivity window, resulting in an approximately 77% difference in flotation recovery between apatite and calcite. These findings demonstrate that nanostarch derived from agro-industrial residues is a promising, biodegradable, and sustainable depressant capable of enhancing selectivity in phosphate flotation. The results contribute to the advancement of greener mineral processing Technologies, although Further studies are required to elucidate the underlying interaction mechanisms.
Paiva et al. (Sat,) studied this question.