What question did this study set out to answer?

The study aims to explore how microstructural features affect the electrochemical corrosion behavior of Al–Si alloys with different Si content.

May 31, 2026Open Access

Relationship Between Structure and Properties in Al–Si Alloys: Thermal, Mechanical, and Electrochemical Corrosion Aspects

Key Points

The study aims to explore how microstructural features affect the electrochemical corrosion behavior of Al–Si alloys with different Si content.
Investigated aluminum-based structures with Si content from 6 to 12.6 wt. % in a 0.5% NaCl solution at room temperature.
Employed potentiodynamic polarization and electrochemical impedance spectroscopy techniques for corrosion resistance evaluation.
Analyzed thermal parameters and cooling rates to determine effects on dendritic spacing and microstructural morphology.
Columnar grain zone exhibits higher corrosion resistance than equiaxed grain zone despite coarser dendritic spacing.
A noted increase in microhardness and tensile strength as Si content increases.
Higher polarization resistance correlates with enhanced electrochemical behavior, indicating dominant roles of passive-layer stability and cathodic phase distribution.

Abstract

In the present study, the influence of microstructural morphology and dendritic refinement on the electrochemical corrosion behavior of directionally solidified aluminum-based structures (columnar and equiaxed) with Si contents between 6 and 12.6 wt. % was investigated in a 0.5% NaCl solution at room temperature. Corrosion resistance was evaluated using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The directional solidification process was repeated for each of the alloy compositions at different cooling rates, yielding different secondary dendritic spacing values. The columnar-to-equiaxed transition (CET) was observed to occur when the temperature gradient in the melt decreased to values between −1.85 and 0.75 °C/cm. In addition, a small increase in the microhardness values was observed as a function of the Si content. The same applies to tensile strength values. The values of the polarization resistance are used as a basic criterion for the evaluation of the corrosion resistance of alloys. The columnar grain zone presents higher corrosion resistance than the equiaxed grain zone, despite presenting coarser dendritic spacing. This behavior contrasts with the commonly expected improvement in corrosion resistance associated with microstructural refinement and indicates that passive-layer stability and cathodic phase distribution play a dominant role in the electrochemical behavior. When the polarization resistance decreases with the increase in the distance from the base, the grain size and secondary dendritic arm spacings increase. In addition, when the polarization resistance increases, the critical temperature gradient decreases. This work allows us to conclude that the modification of thermal parameters in the solidification process can be used for the development of an optimized microstructure morphology and to optimize corrosion resistance in Al–Si alloys through control of dendritic spacing and passive film formation mechanisms.

Relationship Between Structure and Properties in Al–Si Alloys: Thermal, Mechanical, and Electrochemical Corrosion Aspects

Key Points

Abstract

Cite This Study