Second-life lithium-ion batteries offer strong potential for sustainable stationary energy storage, but their practical reuse is limited by cell-to-cell heterogeneity, non-uniform heat-generation, and the resulting thermal safety risks. Conventional battery thermal management systems (BTMSs), which rely on fixed and uniformly distributed coolant flow, are not well-suited to the asymmetric thermal behaviour of aged battery packs. In this study, an adaptive liquid-cooling framework with locally regulated branch-level flow allocation is proposed for second-life prismatic LiFePO4 battery modules. A three-dimensional transient conjugate heat transfer model was developed in COMSOL Multiphysics. The analysis was conducted on a 3 × 3 battery module under nine thermal heterogeneity scenarios, followed by a larger 5 × 4 module to evaluate scalability. The results show that thermal severity depends not only on heat-generation magnitude but also on the spatial arrangement of degraded cells. Under the most critical 3 × 3 configuration, the adaptive BTMS reduced the maximum temperature from 37.16 °C to 28.77 °C, corresponding to a reduction of about 8.38 °C, while limiting the cell-to-cell temperature difference to approximately 1.16 °C. A comparison with a conventional constant-flow cooling configuration in the larger 5 × 4 module further showed that adaptive branch-level coolant redistribution improves thermal uniformity under heterogeneous thermal loading by selectively directing cooling capacity toward thermally stressed regions. The results demonstrate the potential of demand-driven flow allocation as a distributed thermal-management strategy for heterogeneous second-life battery systems.
Saber et al. (Fri,) studied this question.