PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
July 24, 20240 citationsOpen Access

A Flexible Data Acquisition System Architecture for the Nab Experiment

View Full Paper
DMDavid G. MathewsHAH. AcharyaCCC. B. Crawford

Key Points

Key points are not available for this paper at this time.

Abstract

The Nab experiment will measure the electron-neutrino correlation and Fierz interference term in free neutron beta decay to test the Standard Model and probe Beyond the Standard Model Physics. Using National Instrument's PXIe-5171 Reconfigurable Oscilloscope module, we have developed a data acquisition system that is not only capable of meeting Nab's specifications, but flexible enough to be adapted in situ as the experimental environment dictates. The L1 and L2 trigger logic can be reconfigured to optimize the system for coincidence event detection at runtime through configuration files and LabVIEW controls. This system is capable of identifying L1 triggers at at least 1 MHz, while reading out a peak signal rate of approximately 2 GB/s. During commissioning, the system ran at a sustained readout rate of 400 MB/s of signal data originating from roughly 6 kHz L2 triggers, well within the peak performance of the system.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Mathews et al. (2024) studied this question.

synapsesocial.com/papers/68e5f50bb6db6435875897dbhttps://doi.org/10.48550/arxiv.2407.17606
Ask AI
Helpful
Bookmark
Share
View Full Paper