PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
October 1, 1996Journal of Thermophysics and Heat Transfer13 citationsOpen Access

Finite element analysis of poroelastic composites undergoing thermal and gas diffusion

SLSunpyo LeeNSN. J. SalamonRSRoy M. Sullivan

Key Points

Key points are not available for this paper at this time.

Abstract

A theory for time-dependent thermal and gas diffusion in mechanically time-rate-independent anisotropic poroelastic composites has been developed. This theory advances previous work by the latter two authors by providing for critical transverse shear through a three-dimensional axisymmetric formulation and using it in a new hypothesis for determining the Biot fluid pressure-solid stress coupling factor. The derived governing equations couple material deformation with temperature and internal pore pressure and more strongly couple gas diffusion and heat transfer than the previous theory. Hence the theory accounts for the interactions between conductive heat transfer in the porous body and convective heat carried by the mass flux through the pores. The Bubnov Galerkin finite element method is applied to the governing equations to transform them into a semidiscrete finite element system. A numerical procedure is developed to solve the coupled equations in the space and time domains. The method is used to simulate two high temperature tests involving thermal-chemical decomposition of carbon-phenolic composites. In comparison with measured data, the results are accurate. Moreover unlike previous work, for a single set of poroelastic parameters, they are consistent with two measurements in a restrained thermal growth test.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Lee et al. (1996) studied this question.

synapsesocial.com/papers/6a011fddef8139f8ff77bd96https://doi.org/10.2514/3.844
Ask AI
Helpful
Bookmark
Share
View Full Paper