PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 28, 20261 citations

Thin-Wall Single-Crystal Gold Nanoelectrodes toward Advanced Chemical Probing and Imaging.

View Full Paper
MSMilad SabzehparvarFKFatemeh KianiGMGermán García Martínez

Key Points

  • The research aims to develop thin-wall single-crystal gold nanoelectrodes for advanced imaging and chemical probing.
  • Utilized a template-assisted, polyol-based growth strategy for electrode fabrication.
  • Achieved high yield (>80%) and controlled electrode dimensions from sub-100 nm to micron scale.
  • Characterized electrodes through structural and electrochemical methods.
  • Identified higher surface reactivities in smaller electrodes, enhancing chemical detection sensitivity.
  • Demonstrated detection limit of ∼11.0 µm with an operational stability of over 7 hours.
  • Achieved ultralow detection limits down to 79 nm in bulk electrolytes.

Abstract

Thin-wall metal ultramicro- and nanoelectrodes (UMEs/NEs), especially gold-based ones, are key probes for high-resolution electrochemical microscopy, biosensing, and nanoscale interfacial studies. Yet, their broader use remains limited by fragility, low detection sensitivity, and the lack of scalable fabrication methods. Here, we present a template-assisted, non-self-limited polyol-based growth strategy that realizes single-crystalline, thin-walled Au UMEs/NEs, as well as multifunctional probes, with high yield (>80%). The method provides precise control over electrode dimensions, from sub-100 nm to micron-scale radii while the massively parallel polyol growth step overcomes the key bottleneck in scalable nanoelectrode preparation by reliably producing long, continuous single-crystal metal cores. Structural and electrochemical characterization confirm twinned single-crystal Au cores, seamless Au/glass interfaces, and stable performance. Through direct comparison across radii, we show that smaller electrodes consistently exhibit higher surface reactivities, boosting chemical detection sensitivity. In scanning photoelectrochemical microscopy, these NEs achieve an illumination-dependent spatial resolution of ∼250 nm, <1 pA current sensitivity, a detection limit of ∼11.0 µm, and over 7 h of operational stability. In bulk electrolytes, the single-crystalline electrodes achieve ultralow detection limits down to 79 nm, markedly enhancing the signal-to-noise ratio in nanoscale electrochemical measurements. Finally, we demonstrate growth in double-barrel pipettes for multifunctional probes and extend the approach to Pt NEs. This scalable method overcomes longstanding limitations in NE fabrication, enabling advanced electrochemical imaging and its combination with tip-enhanced spectroscopic methods. The single-crystalline architecture also opens new frontiers in catalysis, interfacial electrochemistry, biosensing, and molecular-scale investigations.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Sabzehparvar et al. (2026) studied this question.

synapsesocial.com/papers/69a287130a974eb0d3c028bfhttps://doi.org/10.1002/smll.202514938
Ask AI
Helpful
Bookmark
Share
View Full Paper

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Benchtop Fabricated Nano‐Roughened Microstructured Electrodes for Electrochemical and Surface‐Enhanced Raman Scattering Sensing2024 · 4 citations
  2. 2How to prepare an ultramicroelectrode with a precise geometry2025 · 1 citations
  3. 3Electrochemical selective epitaxial growth of Au microstructures at wafer scale2026
  4. 4Ultramicroelectrode fabrication guidelines for multifunctional scanning electrochemical microscopy2026 · 1 citations
  5. 5Exploitation of carbon surface functionality toward additive‐free formation of gold nanocuboids suitable for sensitive assay of N‐acetylcysteine in pharmaceutical formulations2024 · 4 citations