PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 3, 20260 citations

On strain localization under bending

MJMilan JirásekFGFernando Suárez Guerra

Key Points

  • Strain localization is observed in nonlocal damage models during bending conditions, revealing critical insights into material response.
  • The average curvature acts as a loading parameter that is gradually increased to assess material behavior under uniform bending.
  • Assessment involves idealizing uniform bending with a constant cross-section, eliminating boundary effects using periodic conditions.
  • This analysis highlights the fundamental properties of various formulations of nonlocal damage models in bending scenarios.

Abstract

The aim of the present contribution is to assess the localization properties of nonlocal damage models under bending. To permit a partially analytical treatment and to display the fundamental properties of various formulations, the idealized case of uniform bending is considered. This means that the beam has a constant cross section and is subjected to a uniformly distributed bending moment and zero normal force. The beam is assumed to be very long, and boundary effects that might be introduced by the supports at the end sections are eliminated by imposing periodic boundary conditions on the fluctuating part of the response, which is superimposed on the solution that corresponds to uniform curvature. The average curvature serves as a loading parameter that is monotonically increased.

Ask AI
Helpful
Bookmark
Share

Cite This Study

Jirásek et al. (2014) studied this question.

synapsesocial.com/papers/69a75fafc6e9836116a2b502
Ask AI
Helpful
Bookmark
Share