PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 2, 2026Orthopaedic Journal of Sports Medicine0 citationsOpen Access

A knotless suture anchor construct in MCL reconstruction is not inferior to traditional fixation methods

View Full Paper
TLTimothy LordingFBFelipe Moreira BorimACAnna-Katharina Calek

Key Points

  • The research aims to assess the biomechanical performance of a knotless suture anchor compared to traditional fixation methods for MCL reconstruction.
  • MCL reconstruction performed on 24 human proximal tibial specimens using peroneus longus tendon grafts.
  • Specimens randomized to three fixation methods: spiked ligament staple, screw and soft-tissue washer, knotless suture anchors.
  • Specimens subjected to cyclic loading and load to failure tests using an instrom machine.
  • No significant difference in elongation between the three groups.
  • Median maximum load to failure was comparable among the groups: knotless anchor (132.11 N), staple (123.89 N), and screw and washer (120.75 N).
  • All specimens failed via tendon pullout at the tibial fixation site.

Abstract

Objectives: Traditionally, most medial collateral ligament (MCL) injuries have been managed non-operatively. Recent studies, however, have questioned this approach, highlighting the biomechanical and clinical consequences of residual medial laxities. This in turn has led to a widening in the indications for MCL reconstruction. The distal attachment of the superficial medial collateral ligament is located on the subcutaneous border of the proximal tibia approximately 6 cm distal to the joint line, in close proximity to the insertion of the hamstring tendons. Traditional fixation methods, such as staples and soft-tissue washers, are bulky and may irritate these tendons, necessitating implant removal. A novel fixation technique utilizing knotless suture anchors offers the potential advantages of a broad attachment area, with low-profile fixation. The aim of this study was to evaluate the biomechanical performance of a novel knotless suture anchor construct for tibial sided MCL reconstruction fixation. The null hypothesis is that there is no difference between the new technique when compared to traditional methods. Methods: Distal MCL reconstruction fixation was performed in 24 human proximal tibial specimens using peroneus longus tendon grafts. Specimens were randomized to one of three fixation methods: spiked ligament staple, screw and soft-tissue washer, and the study technique utilizing 4 knotless suture anchors. After fixation the specimens were mounted in an instrom machine and the graft was subjected to a 50N longitudinal force for 1000 cycles followed by load to failure. Elongation under cyclic loading, peak force at failure, and macroscopic mode of failure were recorded. Results: There was no significant difference in elongation (1.05 mm ±0.6 in the staple group, 0.63 mm ±1.2 in the screw and washer group, and 1.09 mm ±0.7 in the knotless suture anchor group) or median maximum load to failure (132.11 N ±40.2 for the knotless suture anchor group, followed by the staple group 123.89 N ±64.1 (95% CI) and the screw and washer group 120.75 N ±54.9) between the groups. The mode of failure was tendon pullout at the tibial fixation site in all specimens. Conclusion: The novel knotless suture anchor technique showed biomechanical outcomes comparable to traditional fixation methods. While there are potential advantages to this technique, including low profile fixation and a lesser need for implant removal, further clinical studies are required to determine its role in MCL surgery.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Lording et al. (2026) studied this question.

synapsesocial.com/papers/6980fd18c1c9540dea80eda9https://doi.org/10.1177/2325967125s00337
Ask AI
Helpful
Bookmark
Share
View Full Paper