Answers are grounded in this paper and cite their sources.
Research investigates microstructure changes in cold-rolled Ni-20 wt.% Cr alloys via electro-treatment, suggesting efficient recrystallization methods.
The effects of direct-current electro-treatment on the microstructure and properties of cold-rolled Ni-20 wt.% Cr alloy were systematically investigated using electron backscatter diffraction (EBSD), a micro-Vickers hardness tester, and a four-point probe. Controlled current densities (1.2–1.8 × 10 4 A/cm 2 ) were applied to clarify the thresholds for electro-recrystallization and twin boundary evolution. Electro-recrystallization initiated at 1.2 × 10 4 A/cm 2 and completed at 1.4 × 10 4 A/cm 2 , accompanied by extensive formation of Σ3 annealing twin boundaries and texture transition from deformation to recrystallization components. At 1.8 × 10 4 A/cm 2 for 1 h, apparent grain growth occurred, with significant reductions in microhardness (− 56.8%) and electrical resistivity (− 33.1%) observed. In contrast, an isothermal thermal benchmark at the same treatment temperature produced negligible changes, confirming the dominant athermal electron-defect interaction as the primary driver of recrystallization. These findings demonstrate that direct-current electro-treatment enables low-temperature, energy-efficient recrystallization and twin-assisted grain boundary engineering, establishing Ni-20 wt.% Cr as a model system for current-assisted microstructure control in Inconel alloys.
No takes yet. Share an insight, caveat, or question.
Chiu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: