Air-to-air (A2A) and air-to-ground (A2G) communication links are typical link types for unmanned aerial vehicle (UAV) communication networks, where radio propagation channels are fundamental for the design and optimization of corresponding communication systems. In this paper, a UAV channel measurement system based on two unmanned aerial vehicles (UAVs) is developed, which is capable of simultaneous A2A and A2G measurements. This system adopts an integrated hardware and signal processing architecture that ensures time and frequency synchronization among multiple aerial and ground nodes. Several data postprocessing steps, including the back-to-back calibration, sliding-correlation-based channel impulse response (CIR) extraction, and constant false alarm rate (CFAR)-based multi-path extraction, are performed to achieve accurate channel data. A channel emulator is used to validate the accuracy of the developed system. Finally, the developed channel measurement system is applied to conduct field channel measurements in a campus scenario. Measured channel characteristics, including path loss (PL), shadow fading (SF), Rician K-factor, root mean square delay spread (RMS-DS), and small-scale fading (SSF) are analyzed, which reveal distinct propagation behaviors between the A2A and A2G channels. These results provide valuable experimental insights and channel measurement data for modeling UAV channels.
Xu et al. (Mon,) studied this question.