Despite global efforts to reduce landfill use for municipal waste, many sites remain active, and older closed sites still require management, particularly regarding leachate. Landfill leachate contains varying levels of organic and inorganic pollutants, generated through biological and physicochemical processes following water infiltration. Its complex composition—including COD, inorganic macro-components, heavy metals, and xenobiotics—necessitates effective treatment technologies to enable safe discharge into surface waters. This study compares low-cost, eco-sustainable adsorbents for the removal of ammonium, trace elements (Cd, Be, Fe, Cu, Ni, Pb, Cr, As, Sn, Sb, Se), and color (as an indirect measure of organic compounds) from urban landfill leachate. In more detail, six biochars from different biomass feedstocks and pyro-gasification conditions as well as natural chabazite and synthetic zeolite 13X (FAU-type) were investigated. After characterization, biochars were characterized and adsorption performance was assessed. Removal performance was comparatively evaluated after 24 h batch contact under fixed experimental conditions. Results showed that gasified biochars achieved high removal efficiency for metals and color but were ineffective for ammonium. Instead, both zeolites demonstrated efficient ammonium removal (~50%) but were less efficient for metals, reflecting the mechanism-driven selectivity of the adsorbents studied. Finally, a principal component analysis (PCA) revealed correlations between biochar physicochemical properties and contaminant retention, providing insight into key factors governing adsorption and informing the design of sustainable leachate treatment strategies.
Bruzzoniti et al. (Wed,) studied this question.