PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
February 28, 2026Scientific Reports0 citationsOpen Access

A non-conventional biodiesel process route from waste palm fatty acid distillate and ethyl acetate via esterification

AEAkintomiwa Olumide EsanBOBlessing Ayomide OlafimihanIOIbidotun Theophilus Olawoore

Key Points

  • This research aims to develop a sustainable biodiesel production process using waste palm fatty acid distillate.
  • Developed a glycerol-free esterification process using ethyl acetate and sulfuric acid.
  • Characterized palm fatty acid distillate for free fatty acids content (91.78%).
  • Employed Taguchi method to optimize key reaction parameters including time, temperature, catalyst amount, and molar ratio.
  • Identified optimal conditions for maximum free fatty acid conversion during the reaction.
  • Achieved a predicted maximum FFA conversion of 87.74%.
  • Validation experiments under optimal conditions yielded an average conversion of 86.28%.
  • Demonstrated that the molar ratio of ethyl acetate to PFAD has the most significant effect on conversion.

Abstract

The high cost and food competition associated with conventional biodiesel feedstocks limit its widespread adoption. This research investigates using palm fatty acid distillate (PFAD), a low-cost industrial by-product which is high in free fatty acids (FFAs), as a sustainable feedstock. A novel glycerol-free esterification route was developed employing ethyl acetate as acyl acceptor and sulfuric acid as catalyst, producing fatty acid ethyl esters (FAEEs) and valuable acetic acid as by-product. The characterization of PFAD confirmed its high FFA content of 91.78 ± 0.62%, then the Taguchi method was employed to systematically optimize key reaction parameters: reaction time (2–4 h), temperature (55–75 °C), catalyst amount (3–9 wt%), and ethyl acetate to PFAD molar ratio (5:1–15:1). Taguchi orthogonal design revealed that the ethyl acetate to PFAD molar ratio had the most significant impact on FFA conversion and time had the lowest impact. Optimal conditions were identified as 4 h, 65 °C, 6 wt%, and 15:1 molar ratio, yielding a predicted maximum FFA conversion of 87.74%. Experimental validation under these conditions achieved an average conversion of 86.28, confirming excellent agreement with the prediction. This research presents one of the first systematic Taguchi optimizations of PFAD esterification using ethyl acetate, offering a greener, glycerol-free pathway compared to conventional methanol-based processes. The proposed route contributes to sustainable biodiesel production from waste products, aligning with global renewable energy goals and economic viability.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Esan et al. (2026) studied this question.

synapsesocial.com/papers/69a2877b0a974eb0d3c03408https://doi.org/10.1038/s41598-026-41785-9
Ask AI
Helpful
Bookmark
Share
View Full Paper