This study investigates the long-term resistance of an environmentally friendly composite made from a blend of local Ordinary Portland Cement (OPC) and ground granite waste powder (G). The composite was subjected to complete static immersion for up to twenty-four weeks in three types of water: potable water, groundwater, and seawater. The experimental work evaluated the effects of exposure to these three water types on various characteristics of the granite–cement composite (GCC), including compressive strength, mass gain, portlandite CH content, bulk density (D), total porosity (p), compactness, water absorption (A), and pH of the immersing media. Additionally, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermal analysis (TGA and DTA) were used to investigate how exposure to the three water environments altered the internal microstructure of the hydration phases of the composite over the twenty-four-week period. This systematic approach provides valuable insights into the variations that may occur in solid hydration outcomes and their sustainability in flooding scenarios. The data obtained from these analyses revealed that the granite–cement composite exhibits acceptable thermal resistance and endurance to deterioration in aquatic environments. The cement formulation contains 20% by mass of ground granite waste powder, with a water-to-cement ratio of 35%. After 24 weeks of complete static immersion, the composite achieved compressive strength values close to 24 MPa. Solidifying radioactive waste in cement–granite is a newly developed method that improves sustainability by formulating a more stable, durable, cost-effective, and less hazardous waste form. Therefore, the granite–ordinary cement composite being studied is recommended as an inert matrix for solidifying and stabilizing certain categories of radioactive waste.
Tawfik et al. (Fri,) studied this question.