PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 22, 2026Géotechnique Letters1 citations

End restraint effects in triaxial tests on H:D = 2:1 specimens of rockfill material

View Full Paper
GGGilbert GirumugishaCOC. Ovalle

Key Points

  • This study aims to assess end restraint effects in triaxial tests on coarse rockfill material.
  • Conducted drained triaxial tests on loose dry samples with a diameter of 150 mm
  • Focused on specimens with a height-to-diameter ratio of H:D = 2:1
  • Evaluated effects of standard rough end platens on material properties.
  • End restraint effects are significant in H:D = 2:1 specimens of coarse angular soils
  • Standard rough end platens increase strain modulus variability and shear strength
  • Lubrication is recommended to mitigate end restraint effects.

Abstract

Several authors have shown that end restraint effects in triaxial tests are negligible in specimens with a height-to-diameter ratio of H:D≥2. However, these works are mainly based on fine soils and sands, and few studies have focused on coarse angular soils, which typically mobilise high frictional stresses that could boost boundary effects. The aim of this study is to assess end restraint effects in triaxial tests on H:D = 2:1 specimens of rockfill material, through a comprehensive set of drained tests on loose dry samples of 150 mm in diameter. The results show that end restraint effects in coarse angular soil are not overcome in specimens having H:D = 2:1. Standard rough end platens induce higher and more scattered secant strain modulus, dilatancy and shear strength. Thus, lubrication should be systematically used in these materials.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Girumugisha et al. (2026) studied this question.

synapsesocial.com/papers/69bf393dc7b3c90b18b43b1ehttps://doi.org/10.1680/jgele.25.00009
Ask AI
Helpful
Bookmark
Share
View Full Paper