PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 28, 2026Journal of the Serbian Chemical Society0 citationsOpen Access

Silica modified with choline chloride/urea des for ligand-free Cu(II) adsorption

SASamer S. AburubNMNur Farahin Ab ManafARAsmaa’ Rohisham

Key Points

  • The research aims to assess the effectiveness of silica modified with choline chloride and urea for removing Cu(II) ions from water.
  • Synthesized silica modified with a deep eutectic solvent (DES) composed of choline chloride and urea.
  • Characterized DES-Si using Fourier transform infrared spectroscopy and other analytical methods.
  • Conducted batch adsorption experiments under varying pH, Cu(II) concentration, and contact time.
  • Analyzed adsorption kinetics and isotherm models to evaluate performance.
  • Achieved a Cu(II) removal efficiency exceeding 95% under optimal conditions.
  • Maximum adsorption capacity was determined to be 17.54 mg g?? based on the Langmuir model.
  • Kinetics followed the pseudo-second-order model, indicating surface interactions as the rate-limiting step.
  • The Temkin isotherm model provided the best fit for equilibrium data.

Abstract

In this study, silica modified with a hydrophilic deep eutectic solvent (DES) composed of choline chloride and urea (DES-Si) was synthesized and evaluated for ligand-free Cu(II) removal from aqueous solutions. The DES-Si was successfully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, nuclear magnetic resonance, and elemental analysis, confirming the effective immobilization of DES onto the silica surface. Batch adsorption experiments demonstrated that DES-Si achieved a Cu(II) removal efficiency exceeding 95% under optimal conditions (pH 8, initial Cu(II) concentration 5 mg L??, contact time 45 min, at 25?C). The maximum adsorption capacity obtained from the Langmuir model was 17.54 mg g??, indicating strong affinity toward Cu(II) ions. Kinetic studies revealed that the adsorption process followed the pseudo-second-order model (R? = 0.9964), suggesting that the ratelimiting step is governed by surface interactions. Equilibrium data were well described by the Langmuir, Freundlich, and Temkin isotherm models, with the Temkin model providing the best fit (R? = 0.9914). Comparative studies showed that Cu(II) removal using DES-Si without a chelating ligand was significantly more efficient than in the presence of 1,10-phenanthroline, highlighting the effectiveness of ligand-free adsorption. These findings demonstrate that DES-Si is a promising and environmentally friendly adsorbent for efficient Cu(II) removal from aqueous media.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Aburub et al. (2026) studied this question.

synapsesocial.com/papers/69c771988bbfbc51511e19b6https://doi.org/10.2298/jsc250829011a
Ask AI
Helpful
Bookmark
Share
View Full Paper