The freeze–thaw cycles lead to cumulative damage and gradual strength deterioration in concrete, which cannot be accurately represented by traditional empirical models. To address this issue, shale-based lightweight structural concrete (LSC) specimens with four strength grades (LSC20-LSC50) were subjected to basic mechanical performance and freeze–thaw cycle experiments. The study investigated the patterns of mass loss, relative dynamic elastic modulus, and loss of compressive strength in LSC subjected to varying numbers of freeze–thaw cycles. Furthermore, the correlation between the dynamic modulus of elasticity and compressive strength was examined. A Gamma process-based stochastic degradation model for the compressive strength of LSC was then developed. The results show that the compressive strength degradation of LSC under freeze–thaw cycles follows a monotonically increasing trend that gradually stabilizes, with low-strength LSC deteriorating faster than high-strength LSC. After 200 cycles, the compressive strength degradation of LSC30 and LSC50 was only 32.66% and 29.79% of that of their corresponding ordinary concretes (C30 and C50). The proposed Gamma process model showed high fitting accuracy for all strength grades of LSC (R2 > 0.96, RMSE < 0.25 MPa, MAPE < 11%). The research results provide a scientific basis for the structural design of concrete in cold regions.
Liao et al. (Mon,) studied this question.