Compressive Strength of Alkali-Activated Recycled Aggregate Concrete Incorporating Nano CNTs/GO After Exposure to Elevated Temperatures

To investigate the effects of incorporating nanomaterials—carbon nanotubes (CNTs) and graphene oxide (GO)—on the axial compressive mechanical properties of alkali-activated recycled aggregate concrete (AARAC) after high-temperature exposure, this study designed 51 sets of specimens with recycled coarse aggregate replacement rate, nanomaterial content, and temperature as the main parameters. Compression tests were conducted to analyze the failure mode and strength variation in AARAC specimens after heating. In addition, microscopic tests, including X-ray diffraction, scanning electron microscopy, and computed tomography (CT scanning), were performed to analyze the microstructural characteristics of the post-heated AARAC specimens. The results indicate that as the replacement rate of recycled coarse aggregate increased from 0% to 100%, the residual compressive strength after exposure to 600 °C decreased from 33.6 MPa to 19 MPa. When 0.1 wt% of CNTs is added, the compressive strength of AARAC after exposure to a high temperature of 600 °C increases by approximately 30.4% compared to that of AARAC without nanomaterial addition. When 0.1 wt% of CNTs and 0.05 wt% of GO are added, the compressive strength after exposure to a high temperature of 600 °C increases by approximately 44.3%, while the size of scattered fragments upon failure increased, and the failure mode appeared more complete. Microscopic test results indicate that the high-temperature treatment did not cause significant changes in the main phase composition of AARAC. The synergistic effect of the nanomaterials CNTs and GO can fully utilize their functions as nucleation sites, pore fillers, and crack bridging agents. By strengthening the Interfacial Transition Zone between the recycled coarse aggregate and the cement paste, refining the Matrix Pore Structure, dispersing local thermal stress, and suppressing the propagation of high-temperature cracks, the mechanical properties of AARAC after high-temperature exposure can be effectively maintained.