Stability Control of Vehicles with Brake Failure Based on the TD3 Adaptive Sliding Mode Control Algorithm

To address the issue of vehicle instability and veering during braking when a single wheel fails in an electric vehicle’s electromechanical braking (EMB) system, an integrated application-oriented control framework based on adaptive sliding mode control (ASMC) is proposed. To address the shortcomings of SMC—such as difficulty in suppressing oscillations and the high workload associated with parameter tuning—a novel composite reaching law function was designed, and the TD3 algorithm was employed to optimize the sliding mode control parameters. When a failure in the EMB system is detected, the upper-layer control uses an improved ASMC algorithm to calculate the vehicle’s additional yaw moment. The lower-layer control employs an optimal control algorithm to distribute braking force, taking into account braking intensity, yaw moment, and tire utilization. This approach is integrated with sliding mode steering control to enhance vehicle stability during braking. To meet the driver’s braking requirements, a backpropagation (BP) neural network is first employed to identify braking intent. Based on this, the additional yaw moment is calculated by the upper-layer controller, and the brake force distribution is optimized through the lower-layer controller, thereby improving the vehicle’s stability. Through co-simulation analysis using Simulink-2024a and CarSim-2019.1, the results show that, compared to traditional algorithms, the proposed hierarchical control strategy reduced the maximum sideslip angle by 51.4%, decreased the maximum yaw rate by 47.2%, and reduced the maximum lateral offset by 45.6%. This control strategy enables enhanced stability across various braking intensity conditions.