Regarding the current issues in Xinjiang, China, during the harvesting of cotton stalks, the lack of specialized, efficient, and durable cutting blades for cotton stalks causes uneven cutting, high power consumption, and short blade life. In this study, a biomimetic serrated blade was designed based on the Trictenotomidae mandible for efficient, low-power-consumption cutting. The biomimetic design, FEM-SPH coupled simulation, bench test, combined with response surface methodology, and field test were used. The simulation results showed that under the same working conditions, the maximum shear stress was 34.81% lower than that for the ordinary blade and 22.05% lower than that for the ordinary serrated blade. And the bench test results showed that cutting power consumption was reduced by about 20.12% and 15.69% compared to the ordinary cutting blade and serrated cutting blade, respectively. When cutting velocity was 1.3 m/s, cutting inclination angle was 11°, and ratio of cutting velocity and feeding velocity was 1.1, the biomimetic serrated cutting blade could achieve effective cutting of cotton stalks and obtain better quality of cutting—the cutting power per unit area and the cutting-edge angle after cutting cotton stalks were 52.08 kJ/m2 and 6°, respectively. The research results can provide a theoretical basis and support for the utilization of cotton stalks out of the field, as well as the cutting of other similar crop stalks.
Huang et al. (2026) studied this question.