Objectives: Management of unstable pelvic fractures during pregnancy presents a major therapeutic challenge, requiring careful multidisciplinary evaluation to balance maternal benefits and fetal radiation risks. Methods: We report the case of a 32-year-old patient who presented with a pelvic fracture due to a road traffic accident at three months of pregnancy. A left sacroiliac osteosynthesis was performed to treat a left sacroiliac diastasis with pelvic osteosynthesis using a trans-iliosacral approach under cone-beam CT (CBCT) guidance using a very-low-dose protocol. Radiation parameters and fetal dose estimates were calculated in advance in collaboration with a medical physicist. Tight beam collimation, a reduced field of view, and minimization of fluoroscopic checks were applied to keep fetal exposure as low as reasonably achievable. This article aims to demonstrate the feasibility of managing a complex pelvic fracture using interventional radiology and to review the literature on management options and gestational age-dependent fetal risks. Results: The estimated cumulative fetal dose from initial imaging, open surgery, and CBCT-guided osteosynthesis remained below 70 mGy using a pregnant phantom (Duke Organ Dose–Dosewatch–General Electric system), which is below thresholds associated with deterministic effects. The procedure achieved optimal screw positioning with less than 40 s of fluoroscopy. Maternal postoperative recovery was favorable, and follow-up revealed normal fetal development. Conclusions: This case demonstrates that CBCT-guided percutaneous iliosacral screw fixation can be safely performed during pregnancy with meticulous planning, dose-reduction strategies, and multidisciplinary collaboration, maintaining fetal radiation exposure below accepted safety thresholds.
Chalamet et al. (2026) studied this question.