PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
May 10, 2026Coatings0 citationsOpen Access

Anti-Corrosion Performance Evaluation of Polymeric Coatings Applied on Aluminum Alloys Exposed to Tropical Climate Influences of Thailand

View Full Paper
CLChuanying LiWPWanida PongsaksawadPKPiya Khamsuk

Key Points

  • This research aims to evaluate the anti-corrosion performance of multilayer polymeric coatings on aluminum alloys subjected to tropical climates.
  • Applied polymeric coatings on 6005A and 6082 aluminum alloys.
  • Conducted exposure tests for 18 months in urban and marine environments.
  • Utilized electrochemical impedance spectroscopy and scanning electron microscopy for evaluation.
  • Coatings exhibited low-frequency impedance above 109 Ω·cm2, indicating effective corrosion protection.
  • Gradual degradation was noted, especially in marine-coastal settings.
  • Estimated service lives of coatings were approximately 8 years in marine-coastal and 11 years in urban environments.

Abstract

This study investigated the anti-corrosion performance of multilayer polymeric coatings applied on 6005A and 6082 aluminum alloys under the influence of the monsoon tropical climate of Thailand. The coated samples, which represented the material used for the vehicle body of high-speed trains, were exposed to real atmospheric conditions of urban (Bangkok City) and marine (Songkhla City) environments. The maximum duration of the continuous exposure test was 18 months. After the exposure test, the physical deterioration characteristics of the coatings were examined with the aid of scanning electron microscopy (SEM) and a pull-off adhesion test. Electrochemical impedance spectroscopy (EIS) was performed in 3.5 wt% NaCl solution at 25 °C to evaluate the coatings’ anti-corrosion performance after various atmospheric exposure periods. Based on the EIS results, the low-frequency impedance of the exposed coatings remained above 109 Ω·cm2, indicating that the anti-corrosion coatings provided sufficient protection against atmospheric corrosion for the alloy. However, gradual degradation of the anti-corrosion coatings was observed, particularly in the marine-coastal environment. Quantitative estimation results suggested that the anti-corrosion coatings used in this study could provide service lives of approximately 8 and 11 years in marine-coastal and urban environments, respectively.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Li et al. (2026) studied this question.

synapsesocial.com/papers/6a002147c8f74e3340f9c1a1https://doi.org/10.3390/coatings16050561
Ask AI
Helpful
Bookmark
Share
View Full Paper