Key points are not available for this paper at this time.
Conventional methods for fabricating frequency selective surfaces (FSSs), such as photolithography and metal deposition, typically require rigid substrates and high-cost equipment, thereby limiting scalability and design flexibility. As a promising alternative, 3D printing enables rapid and lightweight prototyping of geometrically complex FSSs using polymeric materials; however, their inherently poor electrical conductivity restricts their direct application in high-frequency regimes. In this study, we present a hybrid fabrication strategy that combines stereolithographic (SLA) 3D printing with dip-coating using Ti3C2Tx MXene, enabling the production of structurally robust and electrically conductive FSSs without the need for conventional metallisation. A hexagonal Y-slot bandpass FSS was fabricated using five dip-coating cycles, achieving a 99% reduction in weight compared to a copper-coated weights, while retaining excellent electromagnetic performance, featuring a resonance at 11.2 GHz, an insertion loss of 0.743 dB, and a return loss of 21.1 dB. The proposed method offers a scalable and cost-effective route for realising lightweight FSSs and demonstrates significant potential for integration into weight-sensitive electromagnetic platforms such as satellites, unmanned aerial vehicles, and aerospace radomes.
Woo et al. (Sun,) studied this question.