The reliable evaluation of the interfacial bonding quality of steel structures strengthened with carbon fiber-reinforced polymer (CFRP) is crucial to ensuring the long-term service safety of the structures. Focusing on the active and passive detection methods based on piezoelectric sensing, this paper takes numerical simulation as the core research method to provide theoretical verification and mechanism explanation for subsequent key experiments, thus supporting the accurate detection of interfacial damage in CFRP–steel plate joints. A 3D piezoelectric–structural coupling finite element model and a 2D ultrasonic guided wave propagation finite element model were established via COMSOL Multiphysics 6.2 to systematically simulate the electromechanical response characteristics of three piezoelectric sensors (PMN-PT, PZT and PVDF). The research focused on analyzing the potential output and voltage–load response of the three sensors, and simultaneously explored the propagation laws and energy evolution mechanisms of ultrasonic waves in the presence of different debonding damages and groove defects in CFRP plates. The simulation results show that the PMN-PT sensor exhibits the optimal detection performance, with its peak potential output reaching 2.66 times that of the PZT sensor and 4.69 times that of the PVDF sensor, with a load sensitivity of 484.3 mV/kN. In the ultrasonic active detection of interfacial debonding damage, the first-wave amplitude has a significant positive correlation with the debonding length, and this characteristic is attributed to the strong reflection effect and energy accumulation caused by the acoustic impedance mismatch at the CFRP–air interface. For the internal groove defects in CFRP plates, the simulation clarifies that the increase in groove length leads to energy trapping in the plate, while the increase in groove depth intensifies ultrasonic wave energy reflection. The numerical simulation results were compared and verified with data from companion experiments conducted by the authors’ team, showing a high degree of consistency, which confirms the accuracy and reliability of the established finite element models. Meanwhile, the physical essence of damage detection is elucidated from the perspective of wave theory, providing a solid numerical analysis foundation and theoretical support for the intelligent monitoring of interfacial damage in CFRP–steel structures.
Zhang et al. (Thu,) studied this question.