Answers are grounded in this paper and cite their sources.
Observational analysis reveals bio-based resins enhance mechanical properties in DLP printing, suggesting sustainability benefits.
Digital light processing (DLP) three-dimensional (3D) printing requires resins that combine high resolution, mechanical integrity, and sustainability. Here, we present bio-based UV-curable acrylic-isosorbide polyurethane (A-IPU) resins synthesized from isosorbide-ethylene oxide (ISB-EO) diols and aliphatic diisocyanates, followed by acrylation with 2-hydroxyethyl methacrylate (2-HEMA). Four A-IPU resin series were synthesized with number-average molar masses (Mns) approximately 15,000 g/mol and narrow dispersities (Đ) (1.53–1.59). The formulations, prepared with polyethylene glycol 400 diacrylate (PEG400DA) and diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), exhibited viscosities below 400 mPa·s, suitable for DLP processing. Among the four systems, the ISB-10EO and 4,4′-methylene dicyclohexyl diisocyanate (H12MDI)-based A-IPU (A-IPU II) exhibited the best balance of properties, achieving a tensile strength of 5.47 MPa, elongation at break of 14.06%, Shore A hardness ≈ 90, and flexural strength of 1.58 MPa. Complex 3D structures, including tires, snowflakes, and flexible band-aids, were successfully fabricated with dimensional errors below 2%. The mechanical properties of A-IPU II fall within the range of petroleum-based acrylic-PU resins, confirming its practical competitiveness. Importantly, the near-solvent-free synthesis with quantifiable green metrics (PMI = 1.09, E-factor = 0.09, atom economy ≈ 100%) demonstrates the environmental advantages of this system.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: