Comparison of Oleogels Obtained by Emulsion Template Method Using Low Molecular Weight Hydroxypropyl Methylcellulose (HPMC) with Fish and Vegetable Oils

This work evaluated the influence of oil type (sunflower vs. fish oil) and hydroxypropyl methylcellulose (HPMC) concentration on the properties of oleogels obtained by the emulsion-templated method. Oil-in-water emulsions were prepared and air-dried to produce oleogels containing 2.9–5.8% (w/w) HPMC. All oleogels exhibited solid-like behaviour, with viscoelastic moduli increasing with polymer concentration, and showed a high thermal stability. At a comparable HPMC content, fish oil oleogels developed stiffer networks than those obtained with sunflower oil. Texture analysis indicated a linear increase in hardness with HPMC content across both oils, while cohesiveness and adhesiveness were more influenced by oil nature. Oil-binding capacity (OBC) increased markedly with polymer content, exceeding 90% in most systems. However, fish oil oleogels consistently showed lower retention. Colour parameters were only slightly affected by HPMC concentration and were mainly determined by the intrinsic colour of each oil. Overall, both oil type and polymer concentration were shown to be critical factors determining the structural, mechanical, and functional characteristics of HPMC-based oleogels, providing useful information for the development of structured lipid systems as potential substitutes for conventional solid fats.