Overvoltage Elimination via Distributed Backstepping-Controlled Converters in Near-Zero-Energy Buildings Under Excess Solar Power to Improve Distribution Network Reliability

This work uses battery-coupled power electronic converter systems and distributed backstepping controllers to improve the reliability of electrical distribution networks. The motivation is to prevent blackouts such as the 28 April 2025 outage in Spain, Portugal, and the south of France. It is now accepted that a rapid rise in solar power injections caused AC overvoltage above grid code limits, triggering photovoltaic (PV) park disconnections as overvoltage self-protection. This case study considers near-Zero-Energy Buildings (nZEBs) connected to the Madeira Island isolated microgrid, where PV power installation is increasing excessively. The main university facility will be upgraded as an nZEB, using roughly 3000 m2 of unshaded rooftops plus coverable parking areas to install PV panels. Optimizing the profits/energy cost ratio, a PV power system of around 560 kW can be planned, and the Battery Storage System (BSS) energy capacity can be estimated. The BSS is connected to the university nZEB via backstepping-controlled multilevel converters to manage PV and BSS, enabling the building to contribute to voltage and frequency regulation. Distributed multilevel converters inject renewable energy into the medium-voltage network, regulating active and reactive power to prevent overvoltages shutting down the PV inverters. This removes sustained overvoltage and maximizes PV penetration while augmenting AC grid reliability and resilience. When there is excess solar power and reactive power is insufficient to reduce voltage, controllers slightly curtail PV active power to eliminate overvoltage, maintaining operation with minimal revenue loss while preventing long interruptions, thereby improving grid reliability and power quality.